3D MODEL DESCRIPTION
From the ancient realms, this dragon has stories to tell. Flex it, twist it, and imagine what mysteries it might hold as you bring it to life!
Liked what you see? This model was designed by @angeljacobofigueroa
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 49 Minutes* (may vary according to you printer model)
Multicolor - 11 Hours 31 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 7,4 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!