3D MODEL DESCRIPTION
A collapsible Christmas ornament that works as a fidget toy or hangs on the tree as a decoration. Satisfying to squeeze and surprisingly pretty to look at.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 02 Hours 51 Minutes* - 54 g of filament (may vary according to your printer model)
- Approximately Height: 8 x 7,5 x 7,5 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 50 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (concentric)
- Needs Support: No.
- Build Plate Adhesion: Yes (mouse ear brim).
- Others: Mouse ear brim: draw a line from the center out to the sides.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!