3D MODEL DESCRIPTION
A full naval battle experience packed into two rugged matching cases. Each player gets their own unit, and they snap together for easy transport.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor 1x - 10 Hours, 21 Minutes* (may vary according to your printer model)
Multiparts 1x - 10 Hours, 30 Minutes* (may vary according to your printer model)
Multicolor 1x - 14 Hours, 14 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 06 colors) - Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, (Manual Snug) only in the case bracket slot and on “Stand” files.
- Build Plate Adhesion: Yes, (Manual Brim) only in “Stand” files.
- Others: This values assigned for printing a single player.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
