3D MODEL DESCRIPTION
Born from flame and ash, the phoenix rises again and again. Wherever it flies, something new begins
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours, 28 Minutes* (may vary according to you printer model)
Multicolor - 14 Hours, 49 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 11 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: The piece contains fittings and joints, and the Silk-Type filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-Type filament is at your discretion. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim) only “Paws”, “Beak” and “Tail” ends area.
- Others: We use (Archimedean Chords) for finishing the top layers, if you prefer. For “Beak” file use a 0.08 mm profile for better finishing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!