3D MODEL DESCRIPTION
Built to highlight variety.
With six medium trays and small platforms, this kit is ideal for showcasing multiple products at once, especially smaller items that deserve their own spotlight. Clean, organized, and easy to rearrange.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 09 Hours 52 Minutes* (may vary according to your printer model)
*You should use your slicer to put your own prices on tags, and check the piece's position so it prints properly.*
*Note: Printing time based on a Bambu P1s printer, according to our tests.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim (Only for Partition).
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!