3D MODEL DESCRIPTION
A grimoire with a dragon’s gaze, keeping watch over every roll.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 10 Hours 23 Minutes* (may vary according to you printer model)
Multiparts - 13 Hours 44 Minutes* (may vary according to you printer model)
Multicolor - 23 Hours 31 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 18 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Note: This item comes in two versions to accommodate different dice sizes, 19.5 mm and 22 mm, referring to the size of the dice that goes in the central compartment (other compartments do not have this variation). Choose according to the size of your dice.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing