3D MODEL DESCRIPTION
Off to space our dearest spaceship goes, crossing all the rainy clouds on the way. It will be mist.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 03 Days 17 Hours 21 Minutes (will vary accord to you printer model)
- Approximately Height: 25 cm
ASSEMBLY HUMIDIFIER
https://youtu.be/-Rtc5Q0A0dc
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - FOR THE WATER TANK
- Line Width/ Nozzle: 0.4 mm
- Outer Wall: 0.70 mm
- Recommended Layer Height: 0.16 mm
- Wall Loops: 3
- Top Shell Layers: 0
- Bottom Surface Pattern: Monotonic Line
- Bottom Shell Layers: 5
- Speed For Outer Wall: 30 mm/s
- Wall Overlap: 50%
- Infill: 0%
- Click with the right button to “Height Range Modifier” and set it 5 Walls from 0 to 1mm height.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!