3D MODEL DESCRIPTION
An elephant never forgets a face, so it probably has no trouble in remembering to water the plants. If you do, ask this guy for help! You can print it as a cute decor piece, but if you’d like to use it as a watering can, just print it in vase mode. and you’re good to go. It’s elephantastic!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 04 Hours 50 Minutes for BIG version and 02 Hours and 13 Minutes for SMALL version.
- Approximately Height : 23 cm for BIG and 12 cm for SMALL.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- VASE MODE or SPIRAL OUTER CONTOUR
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!