3D MODEL DESCRIPTION
Gentle steps, deep breaths, and zero stress in sight.
Liked what you see? This model was designed by @neongravestoneart
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor** - 01 Hour, 53 Minutes* (may vary according to you printer model)
Multipart** - 01 Hour, 37 Minutes* (may vary according to you printer model)
Multicolor** - 10 Hours, 31 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Length: 13 cm (Elephant Ease Large) - 06 cm (Elephant Ease Keychain)**
*Note: Printing time based on a Bambu P1S printer, according to our tests.
**Note: Large and Keychain files
You Will Need: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre
Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre
ATTENTION: In ‘’Multipart” files it will be necessary to apply glue. For more information see "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim) only ‘’Multipart’’ files.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
