3D MODEL DESCRIPTION
This one doesn't just light a room, it commands it. The kind of piece that makes guests ask questions before they even sit down.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 07 Hours 56 Minutes* (may vary according to your printer model)
- Approximately Height (assembled): 17 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Requires super glue.
Will you need:
You may choose one of the types of lighting described below. The choice is up to you.
Bambu LED Kit: Amazon - Aliexpress - Mercado Livre - Bambu Store
LED Lamp G9: Amazon - Aliexpress - Mercado Livre (If you choose this, don't forget to print the G9 Holder file)
Socket G9: Amazon - Aliexpress - Mercado Livre
Candle LED 2032: Amazon - Aliexpress - Mercado Livre
Candle LED LR1130: Aliexpress - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (tree), only in “Elm” file.
- Build Plate Adhesion: Brim, only in the “Front Armor”, “Back Armor” and “Spectre” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
