3D MODEL DESCRIPTION
Hop on the Eggspress for a smooth ride to breakfast. No cracked eggs allowed!
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 03 Days, 06 Hours, 36 Minutes (will vary accord to you printer model)
- Approximate Measures: Both 18,5 x 23,5 x 7,5 cm
ATTENTION! For this STL, we used eggs available in our region, measuring around 5 cm (2 inches). We recommend scaling your STL to match the size of the eggs available in your area to ensure proper dispenser functionality (free flow).
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes, (Tree) only “Roof and Bus” files
- Build Plate Adhesion: Yes, (Brim)
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
