Egg Frame

3D MODEL DESCRIPTION

A decorative frame designed to highlight your favorite Easter egg. Great as a small display piece or gift.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Kinder Joy Monocolor - 02 Hours, 41 Minutes*  (may vary according to your printer model)
                                Kinder Joy Multiparts - 02 Hours, 59 Minutes*  (may vary according to your printer model)
                                Kinder Joy Multicolor - 13 Hours, 53  Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 08 colors)
• Approximately Height: 13 cm
   
• 3D Printing Time : Kinder Egg Monocolor - 01 Hours, 57 Minutes*  (may vary according to your printer model)
                                Kinder Egg Multiparts - 02 Hours, 56 Minutes*  (may vary according to your printer model)
                                Kinder Egg Multicolor - 12 Hours, 06 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 08 colors)
• Approximately Height: 13 cm

• 3D Printing Time : Reeses Monocolor - 01 Hours, 29 Minutes*  (may vary according to your printer model)
                                Reeses Multiparts - 01 Hours, 41 Minutes*  (may vary according to your printer model)
                                Reeses Multicolor - 09 Hours, 10 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 08 colors)
• Approximately Height: 09 cm

*Note: Printing time based on a Bambu P1S printer, according to our tests.
 

WARMING: This file is highly complex and requires specific print settings. For best results, use the painted support function and significantly reduce your printer speed. If you are unfamiliar with or hesitant to reduce speeds in the slicer, you can reduce them directly on your printer's display by selecting 50% speed. It is also important that your filament is in excellent condition and that your print settings are calibrated. See, “How to slice video” to more information. 

ATTENTION: “Multipart” files requires super glue.
 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.16 mm
• Recommended Perimeters/ Walls: 2.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: Yes, manual painted (Tree type, set 70° to show area to paint)
• Build Plate Adhesion: Yes, (Brim) type only on small parts with poor adhesion to the table. 
• Others: If you prefer, use a 0.08 mm profile for small “Multipart” parts.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!