3D MODEL DESCRIPTION
The further the trip, the better it feels to get home. And these guys came a long way to help you store your keys in the right place. This print-in-place key hanger model has two variants so you can choose whatever you prefer. No elastics are needed, it comes out of the printing bed fully functional.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 20 Hours and 3 Minutes
- Approximately length: 13.5cm x 7cm x 6cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 60mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!