3D MODEL DESCRIPTION
This eagle is an articulated coat hanger. It’s easy to assemble and it’s support free. Just place it on your wall and hang your coat to see the wings spread.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 01 Day 17 Hours 24 Minutes
- Approximately Length: 52 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!