3D MODEL DESCRIPTION
Half skull. Full menace. Strapped in with a belt wrap, this ironhorn-inspired mask turns you into the kind of problem the Badlands prefers not to solve.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Large - 18 Hours, 20 Minutes* (may vary according to your printer model)
Multiparts Large - 21 Hours, 44 Minutes* (may vary according to your printer model)
Multicolor Large - 02 Days, 03 Hours, 52 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 18 x 19 x 27 cm (Large Type)
Monocolor Medium - 16 Hours, 42 Minutes* (may vary according to your printer model)
Multiparts Medium - 19 Hours, 50 Minutes* (may vary according to your printer model)
Multicolor Medium - 02 Days, 03 Hours, 21 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 17 x 18 x 26 cm (Medium Type)
Monocolor Small - 15 Hours, 24 Minutes* (may vary according to your printer model)
Multiparts Small - 18 Hours, 08 Minutes* (may vary according to your printer model)
Multicolor Small - 02 Days, 01 Hours, 10 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 16 x 17 x 25 cm (Small Type)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
Attention: “Multipart” files requires super glue.
You will need a cloth strip, elastic band, leather strap, or whatever you find more comfortable to secure your mask. The measurements should be 05 x 01 cm, or if you prefer, you can use a ruler to measure the opening more accurately.
WARNING: In the "Lens" files, set the parameters below;
- Infill: 45% (Honeycomb)
- Bottom shell layers: 0
- Top shell layers: 0
These parameters are necessary to be able to see behind the lenses. You can change the type and density of the fill to your preference.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. (Tree Type)
- Build Plate Adhesion: Yes, only on parts with low adhesion on the print bed.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!