3D MODEL DESCRIPTION
Designed to keep your book comfortably open with one hand, this page holder features a dragon head and wings that rest over the pages. Practical for reading while adding a bit of fantasy to the moment.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : RockWall - 02 Hours* (may vary according to your printer model)
Monocolor - 06 Hours 38 Minutes* (may vary according to your printer model)
Multiparts - 06 Hours 58 Minutes* (may vary according to your printer model)
Multicolor - 12 Hours 10 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 16 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. External Brim, only in the dragon of multipart.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!