3D MODEL DESCRIPTION
Claws worthy of a legend. Tear through doubts, and your enemies, with style.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours, 06 Minutes* (may vary according to you printer model)
Multiparts - 02 Hours, 58 Minutes* (may vary according to you printer model)
Multicolor - 07 Hours, 11 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 7,5 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue. You should make the "Fit Test Rings" for each finger before printing the final piece, this way you will avoid waste. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim)
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
