Dragon Lord - Harness Bracelet

3D MODEL DESCRIPTION
 

A dragon-themed bracelet with a strong, fierce look. It adds a clear fantasy touch to any costume.

• This STL file is recommended for FDM Printers!
• 3D Printing Time: Monocolor Small - 02 Hours, 55 Minutes* (may vary according to you printer model)                            
                              Monocolor Medium - 02 Hours, 56 Minutes* (may vary according to you printer model)
                              Monocolor Large - 02 Hours, 57 Minutes* (may vary according to you printer model)
    
                              Multipart Small - 02 Hours, 54 Minutes* (may vary according to you printer model)
                              Multipart Medium - 02 Hours, 55 Minutes* (may vary according to you printer model)
                              Multipart Large - 02 Hours, 56 Minutes* (may vary according to you printer model)
  
                              Multicolor Small - 03 Hours, 48 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
                              Multicolor Medium - 03 Hours, 49 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
                              Multicolor Large - 03 Hours, 50 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
   
• Approximately Measurements Small: 20 x 15 x 05 cm (Ring 16mm)
• Approximately Measurements Medium: 21 x 15 x 05 cm (Ring 20mm)
• Approximately Measurements Large: 22 x 15 x 05 cm (Ring 24mm)

*Note: Printing time based on a Bambu P1S printer, according to our tests.

ATTENTION: This model has a complex piece (Mesh) that, to ensure a proper result, please watch the "How to Slice" video carefully.

ATTENTION: This files requires super glue and a cord strap to attach to your wrist.
    

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

 

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.20 mm
• Others: We use (Archimedean Chords) for finishing the top layers.
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid).
• Needs Support: No.
• Build Plate Adhesion: Yes. (Raft Type) In this model you will have to use raft. Complete info in “How to Slice Video”.
• Others:

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
 

Happy Printing!