3D MODEL DESCRIPTION
Inspired by the hanging signs of medieval taverns and guild halls, this shelf marker helps organize your books by section or genre.
We’re providing the initial letters for the following literary genres: Romance, Dystopian, Biography, Thriller, Historical Fiction and Fantasy. You can print them and attach them to the shelf marker to customize your sections.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 04 Hours 23 Minutes* (may vary according to your printer model)
Multiparts - 05 Hours 12 Minutes* (may vary according to your printer model)
Multicolor Version 1 - 07 Hours 19 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Multicolor Version 2 - 07 Hours 15 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 3 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Monocolor” “Multipart” and “Multicolor” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!