3D MODEL DESCRIPTION
A dragon coiled around the blade it was born to protect. This stand turns any katana into the centerpiece of the room.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor - 21 Hours, 17 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
- Approximately Height: 32 x 22 x 12 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, (Tree Slim)
- Build Plate Adhesion: Yes, (Brim Type)
- Others: You can scale it up or down depending on the size of your katana's scabbard, while staying within the print area of your 3D printer.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
