3D MODEL DESCRIPTION
Even in a great coffin, Dracula struggles to sleep. Maybe he’s feeling a bit jumpy?
Our vampire needs some assembly.
Follow these instructions along with the assembly video: [CLICK HERE]
Beginning with the Spring, attach it to Axle, then fit it on the designed place inside the Coffin.
Attach Ratchet on to the other side of the Axle and fit it on the designed place inside the Coffin.
By the side of the hinge of the coffin, fit Ratchet Lock in the correct position inside Coffin then place Cover on top of the Coffin.
Fit the Ratchet Key on the Cover according to the video and secure it inside the Coffin.
Place the Lining inside the Coffin minding the designated spot of the mechanism, then attach the Body of our dear vampire count on the Axle, and your inhabited coffin is ready to scare some people!
Make sure you lock Dracula in place when the coffin’s lid is slightly closed.
Happy Halloween
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 02 Days 11 Minutes
- Approximately Height : 18,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!