3D MODEL DESCRIPTION
This tiny bat is absolutely exhausted from doing nothing all day. It’s not asleep… it’s just resting its eyes. Permanently.
Liked what you see? This model was designed by @neongravestoneart
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor** - 02 Hour, 08 Minutes* (may vary according to you printer model)
Multipart** - 01 Hour, 53 Minutes* (may vary according to you printer model)
Multicolor** - 11 Hours, 21 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Length: 9 cm (Bat Large) - 04 cm (Bat Keychain)**
*Note: Printing time based on a Bambu P1S printer, according to our tests.
**Note: Large and Keychain files
You Will Need: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre
Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and assembly instructions to ensure correct fitting.
ATTENTION: In ‘’Multipart” files it will be necessary to apply glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim) only ‘’Multipart’’ files.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
