Dog with a Treat

3D MODEL DESCRIPTION

A loyal pup clutching their favorite snack! This adorable duo is inseparable, perfect for dog lovers everywhere. 

Liked what you see? 

This model was designed by @angeljacobofigueroa

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor** - 02 Hour, 58 Minutes* (may vary according to you printer model)
                                Multicolor** - 06 Hours, 22 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
                                Approximately Height: 5 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!