3D MODEL DESCRIPTION
These print-in-place Dino Egg models are made with optimizing contact area with the bed. If you’re a beginner in 3D printing, these are the models for you. Just make sure your mechanism stays loose after the printing, and your baby T-Rex is on the way! Who would have thought they would look so cute?
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 03 Hours 01 Minute
- Approximately Dimensions: Egg - 10,3 cm X 13,7 cm X 10,3 cm
Dinosaur - 6,4 cm X 9,1 cm X 4,4 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!