3D MODEL DESCRIPTION
These print-in-place Dino Egg models are made with optimizing contact area with the bed. If you’re a beginner in 3D printing, these are the models for you. Just make sure your mechanism stays loose after the printing, and your baby Parasaur is on the way! Who would have thought they would look so cute?
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 01 Day 16 Hours 50 Minutes
- Approximately Dimensions: Egg - 10,3 cm X 13,7 cm X 10,3 cm
Dinosaur - 7,0 cm X 8,0 cm X 4,4 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!