3D MODEL DESCRIPTION
Is this dice tower bringing you back? This new version of our Dice Thrower is print-in-place, support free, and only has two pieces for assembly. In need of a fun beginner level print? This one's for you!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 3 Days 23 Hours and 47 Minutes
- Approximately length: 25cm x 14cm x 17cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 60mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!