3D MODEL DESCRIPTION
Sharp horns. Deep roots. This one doesn’t do cute.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Large - 09 Hours 40 Minutes* (may vary according to you printer model)
Medium - 06 Hours 08 Minutes* (may vary according to you printer model)
Small- 04 Hours 20 Minutes* (may vary according to you printer model) - Approximately Length: Large - 28 cm
Medium - 22,5 cm
Small - 19 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!