3D MODEL DESCRIPTION
Today’s menu: Brains! Nah, just kitten.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 01 Day, 11 Hours, 38 Minutes (will vary accord to you printer model)
- Approximate Measurements: 22 x 18 x 10 cm
- ATTENTION! For this STL, You must use the “Disk” file to measure the size of the bowl you have, do this before printing the final piece to avoid wasting material.
- Bowl Suggestion: Amazon - Temu - Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
