3D MODEL DESCRIPTION
Rome wasn't built in a day and neither was this colosseum. A proper colossus, the Dead End Colosseum is full of life, reflections of real life history and a lot of stories to be told.
3D PRINT FILE SETTINGS
Recommended for FDM and Resin Printers
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: Brim.
- All other settings must follow your (3D Printer) recommendations!
Pre-Supported: Standard STL file version includes all supports (pre-supported).
Solid Model: You must hollow the 3D print model yourself and add the supports as you wish.
Hollow Model: You must add your own supports.
Happy Printing!