3D MODEL DESCRIPTION
If you’re not a night owl, that’s ok, we now have an owl for you too! It’ll keep you company all the same.
- This STL file is recommended for FDM Printers
- 3D Printing Time Based on Ender 3: 1 Day 6 Hours 10 Minutes
- Approximately Heigth: 20 cm
In order to assembly this print you will need the materials below:
Soldering Iron
Electric Wire
Electrical Plug (2.1mm DC Jack 12V)
Power Supply (12V 1A)
Electrical Tape
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!