3D MODEL DESCRIPTION
Push clay through the muzzle for a silly tongue, then use the barn molds to craft a full mane and tail that snap right onto the horse. A toy that kids build and style themselves.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hours 29 Minutes* (may vary according to your printer model)
Multiparts - 01 Hours 57 Minutes* (may vary according to your printer model)
Multicolor - 07 Hours 27 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Barn Multiparts - 09 Hours 38 Minutes* (may vary according to your printer model)
- Approximately Height: Barn 11 cm - Horse 6 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
ATTENTION: We do not recommend using EVA Clay Type.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (Painted, in the Horse Nose and Auto in the Mouth).
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
