3D MODEL DESCRIPTION
A futuristic, cyberpunk-styled stand that holds the PS5 horizontally and makes the whole setup feel like it belongs in a sci-fi scene. A strong centerpiece for any tech-forward gaming space.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Fat - 06 Hours, 56 Minutes* (may vary according to your printer model)
Multiparts Fat - 06 Hours, 00 Minutes* (may vary according to your printer model)
Multicolor Fat - 15 Hours, 44 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Monocolor Slim - 04 Hours, 53 Minutes* (may vary according to your printer model)
Multiparts Slim - 04 Hours, 59 Minutes* (may vary according to your printer model)
Multicolor Slim - 13 Hours, 58 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 08 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
Use a piece of filament with glue to finish the cylinder section.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes, (Manual Snug) only in “Fat Version” and in the “Screw Holes” of both versions.
- Build Plate Adhesion: No.
- Others: You can use a more optimized print profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
