Cute Animal Bookmark

3D MODEL DESCRIPTION

Every now and then, we all need a breather. I mean, the sun’s about to rise again and you haven’t gone to bed! Here, take this checkpoint and go take some rest. 
 

• This STL file is recommended for FDM Printers!
• 3D Printing Time Based on Ender 3: 06 Hours 02 Minutes (will vary accord to you printer model)
• Approximately Length: 15cm
   

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.16 mm
• Recommended Layer Height:  0.16 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!