3D MODEL DESCRIPTION
A wall-mounted rail that holds two cups or mugs side by side, freeing up counter space in any kitchen or bar area.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Cup and Lid Large - 04 Hours 00 Minutes* (may vary according to your printer model)
Monocolor Cup and Lid Small - 03 Hours 40 Minutes* (may vary according to your printer model)
Monocolor Cup Large - 02 Hours 13 Minutes* (may vary according to your printer model)
Monocolor Cup Small - 01 Hours 54 Minutes* (may vary according to your printer model)
- Approximately Height: 11 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim Ears (Painted), to avoid warp.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!