3D MODEL DESCRIPTION
Drop it in, cruise control on. It’s got your calls covered.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 11 Hours, 51 Minutes* (may vary according to you printer model)
Multicolor - 02 Day, 16 Hours, 21 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 05 colors) - Approximate Measurements: 33 x 08 x 11 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: If your 3D Printer and your Slice Profile has the "Bridge" settings properly calibrated, you can disregard the "Supports" mode. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Grid)
- Needs Support: Yes. (Tree)
- Build Plate Adhesion: Yes. (Brim) only in “Steering Whell” file.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
