3D MODEL DESCRIPTION
Oops, you accidentally saw the monster from your books going back after spending the night under the bed. Slowly back out of the room and pretend you didn’t see anything.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 1 Days 16 Hours 16 Minutes (will vary accord to you printer model)
- Approximately Height: 21 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!