3D MODEL DESCRIPTION
It looks like a cookie, it acts like a monster. Open and close the jaws and let the snack bite back.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 55 Minutes* (may vary according to your printer model)
Multicolor - 04 Hours, 07 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Keychain - Monocolor - 56 Minutes* (may vary according to your printer model)
Keychain - Multicolor - 04 Hours, 18 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 02 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files does not requires super glue.
You Will Need: Rings Key Chain - 1x - Amazon - Aliexpress - Mercado Livre
Rings Connector - 1x - Amazon - Aliexpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!