3D MODEL DESCRIPTION
No need to count past one. Just switch it on, and let your dreams do the rest. Cozy light, sleepy vibes, and very fluffy math.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 04 Hours 11 Minutes* (may vary according to you printer model)
Multipart - 04 Hours 05 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 15 Hours, 10 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 12 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate them with electrical tape. More information in the "How to" videos.
You Will Need: Socket/Conector G9 - Amazon - AliExpress - Mercado Livre
LED Lamp G9 - Amazon - AliExpress - Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid) only “Lamp Holder” files, You will have to use 2% (Concentric Infill) only base for better effect.
- Needs Support: No.
- Build Plate Adhesion: Yes. (Painted Brim) only in the smallest parts of “Multipart” with low bed adhesion.
- Others:For small “Multipart” use a 0.08 mm profile for better finishing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
