3D MODEL DESCRIPTION
Keeps your capsules stacked, organized, and ready to grab without digging through a drawer. A clean addition to any coffee station that actually earns its counter space.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Slim Pod Tower Monocolor - 07 Hours 44 Minutes* (may vary according to your printer model)
Wide Pod Tower Monocolor - 11 Hours 27 Minutes* (may vary according to your printer model)
- Approximately Height (assembled): Wide Pod Tower 24 cm. Slim Pod Tower 24 cm.
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Note: The Slim Pod Tower is for standard Nespresso capsules and holds 6 capsules.
The Wide Pod Tower is for standard Dolce Gusto capsules and holds 6 capsules.
ATTENTION: requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Inner Brim, only in “Pod tower” file.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!