3D MODEL DESCRIPTION
Sand and sea, two sides of every coastal encounter. These modular tiles snap your battlefield into place without any fuss.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : “Sand 16x” - Monocolor - 01 Hour, 21 Minutes* (may vary according to your printer model
“Water 16x” - Monocolor - 01 Hour, 17 Minutes* (may vary according to your printer model)
“Sand 04x” - Monocolor - 32 Minutes* (may vary according to your printer model)
“Water 4x” - Monocolor - 31 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: “16x” 10 x 10 x 04 cm / “04x” 05 x 05 x 04 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files not requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Painted Brim).
- Others: For a better finish, use a more precise profile optimized for the smaller perimeters of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!