3D MODEL DESCRIPTION
A Christmas tree that doubles as a fidget clicker, with slots for mechanical switches and swappable toppers in two styles. It's the kind of thing that sits on your desk and never stays untouched for long.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 05 Hours 06 Minutes* - 69 g of filament (may vary according to your printer model)
- Multicolor - 16 Hours 31 Minutes* - 238 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 05 colors)
- Approximately Height: 9,5 x 9 x 9 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
ATTENTION: These files require super glue.
YOU WILL NEED:
Outemu Blue mechanical keyboard switch Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 50 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (tree (manual)).
- Build Plate Adhesion: Yes (mouse ear brim).
- Others: -Manual tree supports; -Mouse ear brim; -Lower the speed when printing tall parts; -To print the cats, use a 0.12 layer height.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
