3D MODEL DESCRIPTION
Old as winter itself, Claus, the Eternal rides through endless nights to keep the warmth of giving alive. Some say even time bows to his sleigh.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 07 Hours 43 Minutes* (may vary according to you printer model)
Multiparts - 08 Hours 34 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 00 Hours 58 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 06 colors) - Approximately Height: 18,5 cm (assembled)
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim (only for small pieces and “hand” files)
- Others: You can use layer height 0.08 mm in the small pieces for better finish.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
