3D MODEL DESCRIPTION
No frills, no theme, just the game everyone knows. Clean design, portable size, ready to play in seconds.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours, 39 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 10 x 10 x 1.5 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This file doesn't need glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Manual Brim) only in “Board” and “Drawer” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
