3D MODEL DESCRIPTION
Penguins can’t type, but you can type penguins.
Liked what you see? This model was designed by @hiko.3d
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 16 Minutes (will vary accord to you printer model)
- Approximately Height: 1 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.08 mm
- Recommended Layer Height: 0.08 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 25% (Gyroid)
- Needs Support: YES (TREE HYBRID).
- Build Plate Adhesion: No.
3D PRINT FILE SETTINGS
- Recommended for Resin Printers
- All other settings must follow your (3D Printer) recommendations
Pre-Supported: Standard STL file version includes all supports (pre-supported).
Solid Model: You must hollow the 3D print model yourself and add the supports as you wish
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!