3D MODEL DESCRIPTION
Looks like it was shaped by hand, plays like it was made for music. A classic ocarina design ready to print and perform.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 19 Minutes* (may vary according to your printer model)
Multiparts - 03 Hours 15 Minutes* (may vary according to your printer model)
Multicolor - 07 Hours 30 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 9 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
ATTENTION: When painting the mount, paint only the back. AVOID the area around the holes and the inner surface, as this may affect the sound.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: Yes. Standard support (manual). Only at the bottom.
- Build Plate Adhesion: Yes.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!