3D MODEL DESCRIPTION
All the classic classes for you to choose from and have your coaster matching your character sheet plus the new dice set you bought just for this character because you “needed another one”.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 07 Hours 23 Minutes (will vary accord to you printer model)
- Approximately Length: 11 cm
FOR MULTICOLOR PRINT ON A SINGLE EXTRUDER PRINTER, PLEASE WATCH HOW I SLICE VIDEO.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!