3D MODEL DESCRIPTION
Welcome to one of the most liveable cities in the world! Whether you’re a beach or an opera person, Sydney has you covered.
This model uses data from OpenStreetMap, which comes under the Open Database License. This means that whenever you display or sell your prints, you have the obligation of displaying that it comes from OpenStreetMap.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 8 Days 12 Hours 50 Minutes - Big
2 Days 5 Hours 22 Minutes - Small - Approximately Dimensions: 15 cm - Big
9,5 cm - Small
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Top Layers: 7
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes (normal), only in the “Sydney Brigde” file.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!