3D MODEL DESCRIPTION
A comfy place to put your beanbag squad, each one professionally trained in doing absolutely nothing.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Hours 24 Minutes* (may vary according to you printer model)
- Approximately Height: 9 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Attention: We recommend using 1 wall and switching the wall generator to Arachne in order to reduce the amount of material used. In our tests, there was no impact on the piece’s strength.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 1.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: Change the wall generator to Arachne.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
