3D MODEL DESCRIPTION
Classic curves, chrome shine, and a headlight that actually works. Perfect for late-night tinkering or just looking cool.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 01 Day, 13 Hours, 59 Minutes (will vary accord to you printer model)
- Attention in this Assembly: Do not change the recommended profiles in the "PDF" if you use "Silk" filament.
- Approximate Measurements: 30 x 12 x 12 cm
- You will need: Lamp Holder - Amazon - AliExpress - Mercado Livre
- ATTENTION! Use only cold LED lamps to avoid overheating and damaging your product.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Grid) only in “Lamp Background” files
- Build Plate Adhesion: Yes. (Brim) only “Arm” and “Lens” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
