3D MODEL DESCRIPTION
If you’re still longing for dragons, this is our Chinese dragon wine holder! It’s so unbelievably high detailed and it’s still support free! It takes a looong time to print (pun intended), but it’s worth the wait.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 3 Days 01 Hours 25 Minutes
- Approximately Height: 23 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!